Equipment Leasing Solutions
General Lab Equipment
Magnetic Stirrers

How Magnetic Stirring Works & How We Save You Time & Money

Excedr’s leasing program is designed for labs. Request a lease estimate today and see how leasing can save you time and money.

All equipment brands and models are available.
Magnetic stirrer

The magnetic stirrer, also known as a magnetic mixer or a magnetic stir plate, is often found biology and chemistry laboratories working in research and development (R&D).

General lab equipment

That said, magnetic stirrers can be used in numerous industries, including biotechnology, microbiology, healthcare, chemical, and food and beverage. It is one of the simplest devices to use to prepare mixtures, but is not generally capable of stirring large volumes of a sample.

In these cases, mechanical stirring is often required. This is achieved using devices like the overhead stirrer, which can mix, homogenize, suspend, or recirculate large volumes or high-viscosity substances.

Nonetheless, a magnetic mixer is a very dependable piece of laboratory equipment when a smaller quantity of mixing is necessary and the project can easily fit on a small area of your bench space.

In fact, they are often preferred over motorized stir units because they are typically quieter and more efficient. Stirrers are also capable of working inside a sealed vessel or system without having to be isolated.

Magnetic stirrers do not require external moving parts that typically break down over time and often experience little wear and tear.

Magnetic Mixer Methods, Benefits, & Price

A hand with an extended index finger balancing a nut and bolt

There is some variety to the types of magnetic stirrers available. But, most setups consist of a base, stir bar, and a hot plate, which can be made of stainless steel. However, some parts may be made of chemical resistant materials, such as glass or Teflon™.

The stir bar is one such component that benefits from being chemically inert, as it is placed inside of the beaker containing a sample that may include chemicals or other corrosive materials.

Stirrers come in a variety of sizes and are available in single or multi-position configurations. They can operate with or without a motor, and employ the use of magnets to provide continuous, hands-free stirring within laboratory glassware, such as beakers or vials, placed on top of the base. Let’s look at this device’s design and it’s various benefits.

Rotating Magnetic Field

A magnetic stirrer operates using a single rotating magnet or a combination of stationary electromagnets. All magnets are stored below the device.

The magnet or magnets rotate using a motor and an electric current running through them, creating a rotating magnetic field that interacts with the magnetized stir bar placed within the beaker. This magnetic coupling controls the stirring speed of the device, which can be adjusted based on your needs, such as experiment goals or the viscosity of the sample.

As the magnetic field rotates, so does the stir bar, creating a vortex and stirring the contents of any vessel placed on top of the unit’s platform.

In general, stirring speed range varies from 100 to 2400 rpm, along for low and high-speed stirring; however, the device’s stirring capabilities and adjustable speeds mostly depend on manufacturer’s design. As the magnetic field rotates, so does the stir bar, creating a vortex and stirring the contents of any vessel placed on top of the unit’s platform.

Stir Bar

A magnetic stir bar, also known as a flea, is typically made of a small magnet coated in PTFE (Teflon) or plastic. The coating is intended to be chemically inert so as not to react to the mixture the stir bar is immersed in.

This component is not very large, and ranges in size from a few millimeters to a few centimeters. Separately, a stir bar receiver, which is made of a small magnet attached to a long rod, may be used to retrieve the stir bar from inside the vessel.

The limited size of the stirrer bar means magnetic stirrers can only be used for tasks that involve smaller sample sizes, generally around 4 liters or less. The size also makes stirring any highly viscous substances difficult, and in some cases impossible.

Despite these limitations, magnetic bars are easy to clean and sterilize, and do not require any lubrication, which reduces the risk of contamination.

Hot Plate

Magnetic mixers are often coupled with a hot plate to provide a source of heat. In general, the heating plate has a temperature range of 200-250°C, depending on the model, and comes with efficient temperature controls.

Hot plates create heat by running an electrical current through a medium with high electrical resistance, such as a metal coil. The heat provided is safer, gentler, and more controllable than a Bunsen burner.

Single- Or Multi-Position

Depending on the size of your experiment, either a single-position or multi-position magnetic stirrer will be optimal. As a stir bar can only stir so much, you may need multiple flasks to be running simultaneously to maintain efficiency.

In this case, a multi-position magnetic mixer is appropriate to use. These devices allow multiple vessels to be stirred simultaneously, and at different speeds. When dealing with one sample at a time, a single-position stirrer is adequate.

We Offer Magnetic Stir Plate Leases to Fit Every Need

An animated lab beaker changing shapes

Founder-Friendly Leases

Our lease agreements are founder-friendly and flexible, helping you preserve working capital, strengthen the cash flow of your business, and keep business credit lines open for expansions, staffing, and other crucial operational expenses and business development opportunities.

2-5 Year Lease Lengths

Leases range from 2 to 5 years. Length will depend on several factors, including how long you want to use the equipment, equipment type, and your company’s financial position. These are standard factors leasing companies consider and help us tailor a lease agreement to fit your needs.

Your Choice of Manufacturer

We don’t carry an inventory. This means you’re not limited to a specific set of manufacturers. Instead, you can pick the equipment that aligns with your business goals and preferences. We’ll work with the manufacturer of your choice to get the equipment in your facility as quickly as possible.

Maintenance & Repair Coverage

Bundle preventive maintenance and repair coverage with your lease agreement. You can spread those payments over time. Easily maintain your equipment, minimize the chances something will break down, repair instrumentation quickly, and simplify your payment processes.

End-of-Lease Options

At the end of your lease, you have multiple options. You can either renew the lease at a significantly lower price, purchase the machine outright based on the fair market value of the original pricing, or call it a day and we’ll come the pick up the equipment for you free of charge.

No Loan-Like Terms

Our leases do not include loan-like terms, which can be restrictive or harmful in certain situations. We do not require debt covenants, IP pledges, collateral,  or equity participation. Our goal is to maximize your flexibility. When you lease with us, you’re collaborating with a true business partner.

In-House Underwriting Process

Our underwriting is done in-house. You can expect quicker turnaround, allowing you respond to your equipment needs as they arise. We require less documentation than traditional lenders and financiers and can get the equipment you need in operation more quickly.